REPEAT-MEASUREMENT CHECK

Roof Pitch Calculator: Repeat Measurement Check

A 7 in rise over an 18 in horizontal run is 21.25°: arctan(7 ÷ 18) = 21.25°. Keep both repeat records intact until their plane, reference, and units match.

Record A7 in rise; 18 in run

Preserve the original pair and its labels before comparing another observation.

Angle conversion21.25°

arctan(7 ÷ 18) converts this record without averaging it with another.

Copy error7 in rise; 24 in run = 16.26°

Replacing the original run with a different reference creates a second result, not a corrected version.

Two roof pitch measurement records compared by roof plane, horizontal run, units, and reference points.
Compare the record definition before you compare the calculated results.

Keep each pair as a pair

For Record A, degrees = arctan(7 ÷ 18) × 180 ÷ π = 21.25°. Write rise, horizontal run, unit, roof-plane label, and reference points together. Do not replace the source pair with a rounded result or an average.

What the changed run means

If a second note uses 24 in as the horizontal run, arctan(7 ÷ 24) = 16.26°. The difference may be useful, but it should remain visible until the two notes are shown to use the same definition.

Can I average two roof-pitch readings?

Not until the records mean the same thing. An average creates a new number; it does not identify which roof plane, reference point, or unit basis produced either input.

Continue the input check

Enter each confirmed pair separately in the roof pitch calculator. For a plan dimension compared with a field pair, use the plan versus field check.